GE Dishwasher Not Draining? Causes & Fixes
The most common cause: clogged filter or sump. Below are the safe checks you can do yourself, then what a technician tests next.
Try this first
- Clean the filter at the bottom of the tub (twist out the round fine filter).
- New install? Make sure the garbage-disposer knockout plug was removed.
- Check the drain hose for kinks and clean the air gap on the sink.
- Run the disposer, then run a Rinse cycle.
Most likely causes
- Clogged filter or sump
- Disposer knockout plug left in
- Kinked or clogged drain hose / air gap
- Failed drain pump (FTD / F56, C1–C3)
- Control board not powering the pump
Still not fixed? We repair GE appliances in Charlotte the same or next day. Call (000) 000-0000 or request service
Related GE error codes
1H...24H C1 C2 C3 C4 C5 C6 C7 C8 PF Cup Open FTD / F56 LEAK DETECTED 999 H2O PrS