| Code | Meaning | What to check |
|---|
| F0 / F1 | Keypanel (touch pad) or control problem | Usually keypanel; replace keypanel/ERC if code won't clear. |
| F2 / F20 | Oven over-temperature (bake >615-630°F, clean >915-930°F) | Welded bake/broil relays (replace control) or high-resistance sensor circuit. Turn breaker off until serviced. |
| F3 | Open oven temperature sensor (RTD) | Sensor harness/connection; replace RTD sensor (approx. 1,080 ohms at 70°F). |
| F4 | Shorted oven temperature sensor | Replace oven sensor. |
| F5 | Electronic control failure (relay drive) | Replace oven control. |
| F6 | Keypanel problem (some gas models: gas valve lockout) | Keypanel; on gas models check valve circuit. |
| F7 | Stuck function key on keypanel | Replace keypanel if code won't clear. |
| F8 | Control failure / shorted meat probe (older) | Replace control; check probe & receptacle. |
| F9 | Door lock circuit failure | Door lock motor & switches, wiring. Don't force the door. |
| F350 | Upper cooling fan circuit / obstruction | Check cooling fan and circuit. |
| F96 / F97 / F7X | Internal component failure | Service diagnosis - usually control/communication. |
| FC | Door lock circuit (motorized lock switches) | Wiring, lock switches. |
| FD | Shorted meat probe or receptacle | Clean/replace probe or receptacle. |
| FF | Electronic control failure (door motor safety) | Replace oven control. |
| FFF | Control EEPROM failure | Replace oven control board. |
| Bad Line | Unit miswired | Electrician must correct wiring. |
| LOC / LOC DOOR | Control lockout on / LOC DOOR flashes without self-clean | Turn off lockout; reset controls. |
| ERR | Invalid entry | Re-enter settings. |
| OFF | Too hot to self-clean / just after self-clean | Let oven cool. |
| ⊃ (backwards C) | Sabbath mode on | See owner manual to exit. |